Articles Blog

Complete disassembly iPhone 8 Plus and replacement back housing

Complete disassembly iPhone 8 Plus and replacement back housing


Hello everyone, today I show you how to completely
disassemble iPhone 8 Plus and replace back cover To disassemble the iPhone 8 Plus you need
the following tools: • Screwdriver set
• Plastic mediator • Suction cup for removing display
• Tweezers and opening plastic tool • Hairdryer
In the description under this video, I left links to the necessary tools and parts for
replacement. To replace the case of the iPhone 8 plus,
you need to completely disassemble the smartphone, this is a difficult process, but it will be
more difficult to assemble it. Most of the screws are of different sizes,
so I recommend using a magnetic mat in the disassembly process. Before disassembly, turn off the iPhone and
remove the tray with the sim card. Take a screwdriver Pentalobe 0.8mm and unscrew
the two screws near charging port. Take a hair dryer and heat display surface
for 1-2 minutes. Next, fix the suction cup near home button
and pull up on the ring. Take a plastic mediator and try to separate
the display from the iPhone. If you cannot separate using a mediator, you
can take a plastic card. Open the display to the right side like a
book. Unscrew 4 screws and remove the metal panel. Disconnect the battery cable from the iPhone
mainboard. Unscrew 2 more screws and remove the metal
panel. Now you can disconnect 3 cables of display
from mainboard. you need to remove the Taptic Engine. Unscrew the 3 screws and remove the metal
panel. Now unplug the antenna, disconnect it from
the mainboard and remove from the case. Disconnect the Taptic Engine cable and unscrew
the 3 screws. Now you can remove the Taptic Engine. Take tweezers and catch on the edge of the
silicone tape. Slowly pull the silicone tape away from the
battery. Similarly, remove the remaining 3 silicone
adhesive tapes from under the battery. Now you can remove and replace the battery. In the description under the video, you find
links where you can buy a new battery for iPhone 8 plus. A new battery must be gluing to the metal
part of the case, but don’t glue the battery to the wireless charging module. You can glue the battery with double-sided
tape or with special silicone tapes, similar to the original tapes that you removed from
the battery. In my case, I glue on double-sided tape, because
right now I don’t have silicone tape. Install the Taptic Engine, fix with 3 screws
and connect the cable. Install the antenna and connect to the mainboard. Install the metal panel and fasten 3 screws. Unscrew 4 screws and remove 2 metal panels. Unscrew the 2 screws on the metal holder of
the camera module. Now you need to unscrew the screw with a special
screwdriver, which has in our How-Fixit ONE screwdriver set. If you don’t have such a screwdriver, you
can try to unscrew this screw with a flat screwdriver. Disconnect the two camera cables from the
iPhone mainboard and remove the camera. Unscrew the 3 screws and remove the bottom
speaker. Next, disconnect all cables and unscrew all
screws from the case and the mainboard. Now you can remove the mainboard from the
case. All remaining items, such as a camera flash,
buttons and a cable with a charging port can be removed and installed on a new case. If you install on the case from another iPhone
8 plus, these elements will already installed. If you are using a Chinese copy of the case,
then everything will need to install, but everything depends on each case individually. Well, let’s drink coffee and go to the reverse
assembly of the iPhone 8 plus. During the reassembly process, repeat each
step in the order shown in the video. The iPhone 8 plus has been assembled and now
you can connect the display and check how everything works before the final assembly. To check the functionality of all smartphone
functions, it is enough to connect three cables from the display module and then the battery
cable. Turn over the display, turn on the phone and
check how the iPhone works. Remove the old adhesive tape from the iPhone
case. Take the medical alcohol and wipe the case. Also, wipe the display case. Now begin to restore the water resistance
of the iPhone 8 plus. For this, take a waterproof adhesive tape. A link to this adhesive tape you can find
in the description under the video. First, connect 3 cables of the display module
to the iPhone 8 plus mainboard and only then connect the cable from the battery. Install the metal panel and fasten all the
screws. Turn over the display and press it all the
way around the perimeter of the iPhone. Fasten the last two screws near the charging
port and install the sim card tray. Turn on the iPhone 8 plus and use the smartphone.

2 thoughts on “Complete disassembly iPhone 8 Plus and replacement back housing”

  1. Странно! На второй минуте этого видео стекло должно было треснуть.

Leave a Reply

Your email address will not be published. Required fields are marked *