Articles Blog

iPhone X Battery Replacement

iPhone X Battery Replacement


Hello everyone, today I show you how to disassemble
iPhone X and replace the battery To disassemble the iPhone X you need the following
tools: • Screwdriver set
• Plastic mediator • Suction cup for removing display
• Tweezers and opening plastic tool • Hairdryer
In the description under this video, I left links to the necessary tools and parts for
replacement Before disassembly, turn off the iPhone and
remove the sim card tray. Unscrew the two screws near the charging port
with a Pentalobe 0.8 mm screwdriver Take any hair dryer and heat the surface of
the screen for 1-2 minutes. Set the suction cup at the bottom of the screen
and pull the ring up. Next, take a plastic mediator and begin to
disconnect the display module from the iPhone. The case of the iPhone 10 opening like a book. Open the display to the right side. Using a Tri-Wing 0.6mm screwdriver, unscrew
5 screws and remove the metal panel. Under the metal panel, you will see cables. The first is disconnecting the battery cable,
and then disconnecting the 3 display cables To replace the battery on iPhone X you need
to remove the speaker and Taptic Engine. Unscrew 7 screws. Unscrew the screw between the Taptic Engine
and the speaker. Remove the metal panel and unplug the cable. The speaker glued to the phone case. If you want to save the adhesive tape, heat
surface with the hairdryer. Unscrew one screw and disconnect the cable. Now you can remove the Taptic Engine. Now you need to remove 4 adhesive tapes from
under the battery. Take tweezers and catch on the edge of the
silicone tape. Gently and slowly, pull the silicone tape
away from the battery. In the same way, remove the remaining 3 silicone
tapes. In the description under the video, you find
a link where you can buy a new battery for iPhone X
The battery must be glue to the case, for this you can use a similar adhesive tape (usually
such tape comes with a new battery) or if you don’t have silicone tape, you can install
the battery on double-sided tape. Please note that double-sided tape is glue
only to the metal part of the case. Don’t glue the battery to the wireless charging
module. Install the Taptic Engine into the smartphone
case, fasten the screw and connect the cable. Install the speaker into the case and connect
the cable. Set the metal panel
and fasten screw. Install the GSM antenna and fasten the 7 screws. The iPhone X assembled and now you can connect
the display module, test how the smartphone works and begin to the final assembly with
gluing the phone case. To test the iPhone, you need to connect 3
display cables and after the battery cable. Turn over the display, but do not close the
case, just flip it. Turn on the iPhone and check how the smartphone
works. If everything is working properly, let’s begin
to the final assembling. Remove old glue from iPhone X case Using medical alcohol, wipe the iPhone X case
from the old adhesive tape. If you want to restore the water resistance
of your iPhone X, you need adhesive tape like this. Of course, you can assemble your iPhone X
without this adhesive tape, but this makes no sense because this adhesive tape costs
only a couple of dollars. In the description under the video, you find
a link where to buy this adhesive tape. Connect 3 display cables to the mainboard
and only after connect the battery cable. Install the metal panel and fasten the screws. Turn over the display and press it to the
case. Fasten the 2 screws near the charging port. Install the tray with a sim card. Now you can turn on your iPhone X and use
it

1 thought on “iPhone X Battery Replacement”

Leave a Reply

Your email address will not be published. Required fields are marked *