Articles Blog

Razer Phone Durability test – Scratch BURN and BEND tested!

Razer Phone Durability test – Scratch BURN and BEND tested!

One of the most interesting phones to be announced
this year is the Razer Phone – a phone built by a gaming company for gamers, but also has
specs impressive enough to catch the eyes of the rest of us. But is it durable? There’s only one way to find out. [Intro] So once upon a time I durability tested a
phone called the Nextbit Robin. It didn’t do so well. Razer went out and purchased the Nextbit startup,
and basically plopped their impressive hardware into the Nextbit body. So I’m really hoping some structural improvements
were also included. The scratch test is always first with my Mohs
hardness picks that allow us to see what the screen is made of. Like most smartphones these days, Razer is
rocking Gorilla Glass, but this time Gorilla Glass 3. Interesting. Plastic would normally scratch at a level
3, tempered glass is a level 6, and we’ve seen sapphire scratch at a level 8. This Razer Phone is a solid 6 with a deeper
groove at a level 7. So this 5.7 inch display can hold it’s own
against the other major flagships. The phone does have dual front facing stereo
speakers hidden under a plastic grill. Up here at the top of the phone we have another
plastic grill with it’s 8 megapixel front facing camera protected by a circle of glass. The proximity sensor is under glass as well,
so everything’s protected and the plastic grill is very securely attached so it’s not
going to come loose on its own. No problems so far. Over here on the side of the phone we have
a SIM and SD card slot that can hold an additional 2 terabytes of storage. Pretty impressive. I’d like to see an iPhone do that. The sides of the phone are metal which is
a refreshing change from the previous totally plastic Nextbit Robin. The fingerprint scanner is stretchable. It’s not invincible like the ceramic of the
OnePlus 5 or Apple’s Sapphire, but the good news is is that even with the abuse, the fingerprint
scanner is still able to read my finger every time. There are no additional ports at the top of
the phone, but everything is still metal. And over here on the side of the phone we
get two extremely small circular volume buttons, both of which are metal. The bottom of the phone does have a USB-C
slot with no headphone jack, and honestly, a phone this size with bezels big and no waterproofing,
it should include a headphone jack unless they were to include wireless headphones or
even a USB-C headphone in the box. It’s just pure laziness on the manufacturing
end and the loser is the customer who now has to go out of their way to do something
normal. I’ve been scratching the dual camera lens. One is a telephoto zoom lens, which is nice. And while they are covered in glass, my razor
is leaving permanent marks on the surface, so there is some kind of coating over the
top. My razor blade is about a 5.5 on Mohs scale
of hardness, and that’s when the scratches start appearing. So while it’s not plastic, I would still recommend
not setting this phone down on its back without some kind of case with a raised lip to protect
that lens. A case is also a good idea for the back metal
because my keys are leaving marks, and the marks don’t disappear like we saw with the
OnePlus 5T. Razer has their iconic 3-headed snake logo
type thing, smack dab in the middle of the phone and it’s inlaid pretty solidly into
the metal. My razor blade struggles to grab an edge,
and even then, it’s glued pretty tight. So it probably won’t ever fall out on it’s
own. Now if you followed Razer at all, they make
gaming hardware. And their gaming computer mouse line is pretty
much all named after snakes…since you know, snakes eat mice. Kind of an interesting connection there. So here we have a cute little mouse friend. He doesn’t have a name quite yet so let me
know in the comments what his name should be. He’s looking pretty sharp. Maybe him and Rex from the Pixel 2 XL will
get along. There is solid metal behind the snake logo
so it won’t be possible to add an LED conversion like we did with the iPhone, but there is
a tiny hole through the metal which may allow wires to pass through. So maybe Razer did think about adding RGB
to this phone. Either way, hopefully they do it with their
next device. The biggest selling point for me though on
this phone is the refresh rate of the screen. Normal phone screens can show 30 or 60 images
per second, but this phone has a 120 Hertz refresh rate, making the display super smooth
for gaming and watching videos. AMOLED screens are incapable of achieving
this refresh rate at the moment – just IPS LCD screens. And that’s what we’re seeing here as the pixels
completely recover from the burn test. The display brightness seems to be lacking
though. Mine is currently turned all the way up. And now it’s time to see if the Razor phone
has the same fragile internal build quality that the Nextbit Robin did. The initial flex gives us quite a bit more
bend than usual, but nothing is catastrophically damaged yet. We do get a pretty severe kink next to the
power button as I straighten the phone out, but it’s still cosmetic and the phone is still
alive. During the next flex there is a snap near
the volume button, but overall the phone is still surviving. Even with the most extreme of abuse, this
damage is superficial. And while this is definitely not the strongest
phone I’ve ever tested, it will stand up to the basics, and it’s a huge improvement from
the Nextbit Robin. A case is always a good idea, especially for
that camera lens, and keeping the metal clean from blemishes, but it’s good to know that
the phone itself is structurally sound. I’ll be tearing this phone down to see the
insides and that massive battery, so subscribe for that. And let me know what we should name our mouse
friend. We can vote on the best suggestions over on
my Twitter. Thanks a ton for watching, and I’ll see you

100 thoughts on “Razer Phone Durability test – Scratch BURN and BEND tested!”

  1. Jerry, in the box there is a little adapter called the razer connector that can upgrade the quality of the headphones. At the 3 shop they plugged the adapter in with some standard AKG Samsung earphones and it made the sound quality very high. So, yeah.


  2. 1:22 "…and the plastic grill is very securely attached" dude mine just fell off yesterday, and apparently i'm not alone

  3. Instead breaking your cellphone , give it to me , because I really need cp to my school making assignment and research and another razer is my best favorite cp iwiss ihave it one

  4. I dropped this phone, it bent, and now the screen freaks out. very delicate, no parts to use to replace

  5. Give it to me if you are going to distroy another one
    Becouse ipod are my dream
    I cant even afford it on dream

  6. this phone was perfect for me, and i was able to get it at one point last year, but for some weird reason it was in my hand during a panic attack and it bent so badly it almost snapped in half because of a muscle spasm thing i had in my hand and i couldn't get it fixed :(( half of the screen became completely unusable T_T

Leave a Reply

Your email address will not be published. Required fields are marked *