Articles Blog

Razer Phone Teardown! – HUGE Heat Pipe – tiny vibrator

Razer Phone Teardown! – HUGE Heat Pipe – tiny vibrator


The Razer Phone has survived my durability
test and now it’s time for the teardown and review from the inside. We had a vote over on my Twitter yesterday
to name our new little mouse friend, and out of the suggestions in my last video came Mousey
McMouse Face, Mr. “Moh’se”, and Jerry (from Tom & Jerry) ended up winning though. Good choice. I like that name. Let’s call him Mr. Jerry Moh’se, and I just
hope he survives the teardown. Let’s get started. [Intro] Since there are no visible external screws
on the Razer Phone, the only logical explanation is that they are hidden under the plastic
speaker grills. And as with most adhesive, this stuff gets
softer as you heat it up. I’ll take a thin pry tool, or in this case,
a razor blade, and pry up that bottom plastic grill exposing a few screws. I’ll repeat the process with the top grill
by warming it up and putting my razor into the Razer and razoring it around a little
bit. The camera lenses come off with that top plastic. I’ll try to find replacements for these and
link them in the description. But since this isn’t a super mainstream phone,
it might be difficult. I’ll pull the SIM card tray out just in case
that’s important. And then there are 6 screws at the bottom,
a combination of Phillips and T5 screws. There are another 4 screws up at the top;
one T5 and the rest are Phillips head. Getting the screen out of the frame was a
little bit easier than I anticipated. It’s held in place with friction and a few
small clasps. So with a little leverage at the bottom of
the screen and some gentle persuasion, the whole thing can pop up and out of the phone
body…way easier than the OnePlus 5T. Already we can see some pretty interesting
things inside this Razer Phone, but we need easier access to get a better look. There are a billion different sized screws
in here, so I am going to keep things organized. I’ll detach the screen ribbon cable first
by unscrewing the metal bracket connector – it’s a Phillips head. And I’ll peel back some of the metallic shielding
over those connectors. First thing to unplug is the massive battery,
and then the screen ribbon. And now that the screen’s free, let’s look
at this massive heat pipe. This might be the biggest heat pipe I’ve ever
seen in a cellphone. It’s also got the thermal paste right over
the top of the copper so the heat dissipation will be more efficient between the copper
and the processor. Under the black tape there’s another sheet
of copper thermally adhered to the copper below it. More copper is always a good thing. The adhesive only sticks one time though,
so I’ll just, um, put that off to the side and it’s good as new. This is the screen component, the 120 Hertz
IPS beast of a display this phone is known for. If you manage to break yours unfortunately,
I’ll try to have some replacements linked in the video description for you. So far it’s been a pretty straightforward
replacement. Now let’s get that gigantic battery out. I’ll unclip the fingerprint scanner cable
from the motherboard. And then on the other side of the phone I’ll
remove the two screws holding down the volume ribbon bracket. I’ll set that off to the side and then unclip
the volume button connector just like a little Lego. This battery does have the magical pull tabs
thankfully. And Razer was nice enough to give us a big
enough tab to actually grab and pull on. [Stretching rubber sounds] But wait, there’s more. [Stretching rubber sounds] Unfortunately there was some premature decapitation,
and now I have to commence the Pry of Shame. But still, pretty simple to replace the battery
in this thing. A 4000 milliamp hour Razer branded powerhouse
which is over twice the capacity of the iPhone 8. Pretty impressive. Now for the charging port and vibration motor. This is where things get a little more complicated. There are a total of 7 screws holding this
thing down, with a few golden frame attachments to that plastic antenna line. I’ll disconnect and peel back that charging
port ribbon from the motherboard and remove the signal wires, and then the whole thing
can come free. The USB-C charging port has a little bit of
rubber around the tip, but remember that this phone has no water resistance, so be careful. Now for that vibration motor. In most smart phones we find an eccentric
rotating mass motor, or circular coin vibrators, but Razer has stuck in a taptic vibrator,
similar to what we’ve seen on the iPhones, but a fraction of the size. It’s incredibly small. Marquez was complaining about his vibrator
being trash. [Marquez] Sounds broken. But it sounded that way out of the box since
day one. And now we can see why. It’s barely even there. I assume Razer is making up for it’s small
size by overpowering the itty-bitty guy and getting that blown out rattling sound like
you would with a speaker. Apparently size matters when it comes to vibrators. The bottom loudspeaker is on the other side
of the phone and it’s pretty interesting. Once again, no waterproofing, but the speaker
cone is made from rubber, kind of like what we saw in the Apple Airpods. So even if moisture does get into the speaker,
it won’t distort or blow easily, and will wear out less with time. It’s nice of Razer to put quality speakers
inside of their phone. I’ll toss the loudspeaker with it’s golden
contact pads back into the frame and make my way up to the top of the motherboard. The dual camera system is hidden under that
metallic tape. I’ll peel that up and unscrew the one screw
holding down the metal bracket over the connectors. It’s a weird bracket with a little rubber
doohickey keeping it from popping out on one side. The cameras themselves can unplug like little
Legos, and there are 2 screws holding the whole thing down. One screw is tucked up underneath the camera
connector. This is not the most organized phone I’ve
ever been inside, but it’s still not as bad as the old HTC’s. Neither the regular camera lens nor the telephoto
camera have OIS, which is unfortunate. Optical image stabilization is pretty important
when it comes to cameras and taking video. There is no side-to-side hardware stabilizing
that we’ve seen on other major high-end flagships. There are 5 more screws holding down the gold
antenna line brackets to the motherboard, and then one more screw hidden next to the
front-facing camera. The whole motherboard can lift up and away
from the phone body after that. The 8 megapixel front facing camera is removable
if you’re into that kind of thing. Also, one more cool thing is that the front
earpiece looks like it’s the same size as the bottom speaker, so there will be equal
sounds coming from both ends of the phone. It’s just oriented in a different direction. The top speaker also has that same durable
long lasting rubber cone that we talked about earlier. And now it’s time to see if our little mouse
buddy is still alive. I’ll get all those golden antenna line brackets
back into place with those 6 motherboard screws. There’s another 2 screws specifically to hold
down the rear cameras. I’ll get that silver bracket situated with
it’s one screw and funky white little rubber pad thing, and make my way down to the bottom
of the phone. The charging port goes in with it’s gold antenna
line brackets and 6 screws. And the long extension cable can run up along
the frame to the top and plug into the motherboard. I’ll tuck that massive battery back into place,
and get this silver bracket with it’s two screws back over the volume button ribbon. The fingerprint scanner Lego-like connection
is next, and then I’ll toss that metallic tape back on over the cameras and SD card
slot. I do like saving the battery connector for
last to be safe. So we’ll get the screen lined up and plugged
in, and then the battery. The metal bracket goes over the top of all
those connectors with it’s one screw to hold it down tight. Getting the screen lined up and pressed down
was easy enough. The kink near the power button from my bend
test didn’t mess me up too much. Since I am working with glass though, I was
pretty gentle and careful getting it back into place. Cracking the screen at this point would be
incredibly unfortunate. And it looks like everything still works. This phone is currently available on Amazon
right now, so I’ll leave a link for that in the description along with all the parts and
tools I used during this video. Hopefully you never break yours, but accidents
happen. I’ll get all the screws back into the frame
and unfortunately, the speaker grills are not going to go back into place nicely. Once they’ve been peeled off, the adhesive
is not reusable. I’ll probably try some double sided tape at
some point, or just wait till I can find some replacements. Jerry Mouse is glad he survived the teardown
and thanks you all for his new name. Come hang out with us on Twitter. Jerry and I thank you a ton for watching and
we’ll see you around.

100 thoughts on “Razer Phone Teardown! – HUGE Heat Pipe – tiny vibrator”

  1. I’m planning on getting a new phone and this one interested me. I currently have a s8 and was wondering if this would be a upgrade or a downgrade

  2. What about the led light from the back of the phone?When you unbox and test the phone,you saw that when you will remove it's parts, you'll show the led light, but you didn't did that…

  3. La pasta termicaaa se te olvido poner una nueva asi se calentara mucho mas y rendira mas mal no hagas las cosas tan chapuzas si estas intentando enseñar algo.

  4. Hi there, i have a broken razer phone 2 (only the rear glass) but the link in description leads to a website that doesn't sell it, where to buy it?

  5. Hey man could you point me in the right direction finding a sim car/micro ssd tray replacement? I can not find it anywhere. thanks

  6. Where do I get another battery for this? Mine has swollen up like a balloon and is pushing the screen off

  7. Jerry I dropped my Razer phone 2 and shatter the back glass. Please link a fix 🙏 for me press f to pay respects.

  8. is there anyone who can send me link on new replacement of that port usb c? mine is broken and they dont want give me new bc they said its mine fault 🙁

  9. Makes a teardown video

    Puts a bucket of Razer blade in the table because the phone is A RAZER phone get it?

  10. After more than a year I still get nervous seeing someone work on a razer with a razor on top of a ton of razors…

  11. and putting my "RAZOR" into the "RAZER" and "*RAZORING*" it around a litte bit.

    You just said Razer 3 times.

  12. Is it just me or do I not understand how "magic pull tabs" work or how there good, I often see them broken while pulling so there not that magical

  13. Did you find replacement speaker grill or new adhesive to put grill back on
    Ive got the phone and top grill is becoming loose

  14. Most greatest thing is easy to open. Gently but easy. Not like smsung edge. Samsung edge is specially designed for cracking etc;;];]];] But if you crack the screen during opening razer phone… you are in deeeep shiitt asss. Replacements available somewhere -> nowhere "]

  15. sorry if my questions sounds dumb but i cant fine one single source to get new razer phone battereies from… anyone smarter than me?

  16. I liked your videos thumbs up for that. but i am waiting for your video of teardown of huawie and samsund fold mobiles. Are you gonna make the video on them or not ?

  17. Jumped in the ocean to save my expensive fishing rod. Now this phone is toast and all my pictures and contacts are gone. Poop lol but saved the fishing rod. No way to get data back is there?

Leave a Reply

Your email address will not be published. Required fields are marked *